Joyetech Ultex T80 80W TC + Cubis Max Tank Starter Kit

Write a Review


You save $33.51
Get Coupons
  • 10% off on your order* , Code : ECM10
  • Buy one Device Get 25% off on any one E-liquid* , Code : KIT25
  • Buy one Device Get 30% off on any one Replacement Coil/Pods* , Code : KIT30


SKU:joy-ultex-t80 ,UPC: ,Availability:




Please Check Our Returns & Warranty Policy Page For More Details!


Please Check Our Returns & Warranty Policy Page For More Details!


The Joyetech ULTEX T80 Mod features a mechanical tube inspired design that allows for a maximum output wattage of 80 watts and supports multiple temperature control modes. The ULTEX T80 features a stealth mode along with a preheat function for immediate satisfaction. The ULTEX T80 is powered by (1) high amp 18650 battery (sold separately) that may be charged via the micro USB charging port. The included Cubis MAX utilizes the Joyetech NCFilm Heater which features no coil and allows for a rewickable cotton design. The NCFilm Heater features a horizontal kanthal design which allows for a larger heating area than a traditional atomizer head. The NCFilm Heater design allows for a longer lifespan than the standard atomizer head. The Cubis MAX features a 5.0ml e-Liquid capacity that may be filled using the retractable top fill design. The Cubis MAX features a leak resistant design with top adjustable airflow control valve. A pack of cotton strips and replacement parts are included in this kit.

Joyetech presents the Ultex T80 with CUBIS Max Starter Kit, a combo that delivers 80W maximum wattage output, 5ml e-liquid capacity, and the revolutionary NCFilm heating element. The Ultex T80 tube mod has six output modes: wattage output, temperature control, bypass mode, and three TCR modes. Wattage mode is capable of 1 to 80W of output, 3.3V to 4.2 output, and 0.05 to 3.5 ohm atomizer resistance range. The temperature control suite is compatible with Nickel, Titanium, or Stainless Steel. Temperature control mode has a temperature range of 200 to 600 degrees Fahrenheit, and an atomizer resistance range of 0.05 to 1.5 ohm. The Ultex T80 is powered by a single 18650 battery (sold separately) accessible through a threaded bottom battery cap and has a simple three button control interface with an over-sized firing button and dual adjustment buttons. The Ultex T80 has a 0.49 inch OLED screen large enough to display atomizer resistance, output voltage, and power output. The Ultex T80 has a charge rate of 2A through the micro USB outlet. The Ultex T80 is paired with the unique CUBIS Max atomizer, featuring the NCFilm Heating material. The CUBIS Max is 25mm at its base, 28mm at its widest point, and is 56mm tall. This sub-ohm tank has 5ml tank capacity and can be refilled through a sliding top fill cap. The CUBIS Max utilizes the NCFilm heating material, a horizontal kanthal plate that has an atomizer resistance of 0.25 ohm and best used at 40W. The CUBIS Max has dual adjustable 10mm by 2mm airflow and an 11mm wide 510 bore tapered Delrin drip tip.

The Joyetech Ultex T80 with CUBIS Max Starter Kit is a refreshing innovation in the industry that offers a unique design and great performance!


  • Dimensions: 3-11/16" x 1" (Without Tank)
  • Diameter: 28mm
  • 510 Threaded
  • Output Wattage: 1.0 - 80.0W
  • Temperature Control: Nickel 200 (Ni200), Titanium (Ti), Stainless Steel 316 (SS316), TCR Modes
  • Temperature Control: 100 - 315C / 200 - 600F
  • Resistance: 0.05 - 3.5 ohm in Wattage Mode
  • Resistance: 0.05 - 1.5 ohm in Temperature Control Mode
  • Stealth Mode
  • Preheat Function
  • 0.49" OLED Display Screen
  • Mechanical Tube Inspired Design
  • Requires (1) High Amp 18650 Battery (Sold Separately)
  • Micro USB Charging Port
  • Maximum Charging Current: 2A
  • Firmware Upgradeable
  • Dual Circuit Protection
  • Reverse Polarity Protection


  • Dimensions: 1-7/8" x 1" (Including Drip Tip and Threads)
  • Diameter: 28mm
  • 510 Threaded
  • E-Liquid Capacity: 5.0ml
  • Retractable Top Fill Design
  • Glass Tank
  • Leak Resistant Design
  • Dual Airflow Slots
  • Top Adjustable Airflow Control Valve
  • No Coil and Rewickable Design with Cotton Included
  • Larger Heating Area
  • Utilizes Joye NCFilm Heater Horizontal Kanthal 0.25ohm for Wattage
  • Includes (2) NCFilm Heater 0.25ohm (Pre-installed) (40W)
  • 510 Drip Tip Compatible

JOYETECH ULTEX T80 Starter Kit Package Contents:

  • 1 x Joyetech ULTEX T80 Mod
  • 1 x Joyetech Cubis MAX Tank
  • 2 x NCFilm Heater Kanthal 0.25ohm (Pre-installed)
  • 1 x Pack of Cotton Strips
  • 1 x Replacement Glass
  • 1 x QC USB Cable
  • 1 x Screwdriver
  • 1 x Set of Spare Parts


Frequently Bought Together:

Inc. Tax
Ex. Tax

Customers Also Viewed